We have gas commercial engineers who can deal with all the large gas, heating appliances such commercial boiler, commercial cooker in the restaurant, commercial grill, commercial oven, etc. All of our domestic and commercial gas / heating / boiler engineers have been recommended by “Time Out” London Magazine and recommended by word of mouths from our existing customers.
They can deal with commercial boilers like all gas combi boilers, oil condensing boilers, gas condensing boilers, vaillant condensing boilers REMEHA Commercial & Domestic boilers , PEERLESS Commercial & Residential , WEIL MCLAIN GAS OIL Commercial & Residential boilers, COLUMBIA Commercial & Industrial Boilers , BUDERUS Commercial & Industrial and some more other makes. They can also repair and maintain domestic boilers for you too.
For your peach of mind, we send the engineers to the up-to-date training courses every so often to upgrade their knowledge on new things so that we can catch up with all the new technologies and changes and this is for YOU, the customer;s benefits. We are confident that this is what makes us different to other engineers from other companies as we know once they all have been through the training they will become more confident and they can deal with difficult situations of complicated jobs. They have been doing long enough to know how to how to install a radiator and how to repair, maintenance, and install central heating, gas condensing boilers, baxi heating, vaillant combi boilers. When we do the service on gas boilers we service them and checked properly
We Deal with All Types of Boiler System - For Example :
-Commercial & Residential Combination boilers
- Commercial & Residential Central Heating installation
- Commercial & Residential System boiler Heating installation
- Gledhills boiler, heating system
- Commercial & Residential Central Heating installation
- Commercial & Residential Combination boilers
- Commercial & Residential System boiler Heating installation
- Gledhills boiler, heating system
Condensing Boliler - Get Your Boiler Repaired by Recommended Gas Safe Registered Engineer
Combination boilers and system boilers both carry pressure gauges and we're often asked about the pressure shown on these gauges. Any sealed central heating system needs an expansion vessel, a pressure gauge and a pressure relief safety valve.
If you heat water it expands. In an open vented central heating system (with a header tank) some of the water moves back up into the header tank. The expansion does not increase the overall volume of water by a huge amount (maybe 3 or 4 litres, depending on the size of the heating system) but it would be more than enough to burst the pipes if it had nowhere to go.
In a sealed system you have to allow for this expansion. This is done by adding an expansion vessel to the system pipework and it's often inside the boiler. The expansion vessel is just a chamber with a rubber diaphragm across the middle. One side of the expansion chamber is connected to the system pipework. The other side has a car tyre type valve so it can be pumped full of air.
In manufacture the air side is pumped full of air, typically to about 1 bar (about 15 psi). This forces the diaphragm right across to the opposite wall of the chamber. When the central heating system is filled with water and pressurised (to about 1 bar) the water pushes the diaphragm back to about the middle
Get to know "Gledhills BoilerMate"
BoilerMates are thermal stores, in other words a tank full of water heated by an ordinary central heating boiler. The water never changes. It is used purely to store heat energy from the boiler. The stored hot water is pumped around the radiators top heat the house, and is used to heat domestic tap water before it arrives at the hot taps. This allows hot water to taps and showers at full mains pressure for high performance showering and faster bath filling.
The boilermate is very similar to the SysteMate and the two are easily confused. The difference is that the Boilermate pumps the thermal store water around the radiators directly, meaning radiators cannot be installed at a higher level than the BoilerMate cistern. The SysteMate separates the central heating water from the thermal store water using a copper heating coil inside to transfer heat from the boiler primary into the thermal store water, allowing use of a sealed heating system and location of the SysteMate becomes free
We know that it is a huge problem finding right and honest trade’s people including good plumber’s and gas engineer’s in London and even in the surrounding areas. Especially, during the “Current climate”- you don’t want to spend money on something if you don’t know if it will be worthwhile. Don’t panic! A reliable company like us are here to change this. We are offering the benefits of the knowledge we have to give “YOU” the customer the right advice – this will result in you saving hundreds or even thousands of pounds in some cases. This is for your benefit.
