Emergency Air Cooling Appliance Installers

If your system heats and cools your home: Perform maintenance in the spring and fall.

Cooling-only:

Perform maintenance at least once a year, before the cooling season.

Heating-only:

Perform maintenance at least once a year, before the heating season.

It is important to keep the maintenance up on your air conditioning and heating systems.

Outdoor units

You should expect your service technician to:

Inspect unit for proper refrigerant level and adjust if necessary Clean dirt, leaves and debris from inside cabinet Inspect base pan for restricted drain openings—remove obstructions as necessary Inspect coil and cabinet—clean as needed Inspect fan motor and fan blades for wear and damage—on older models lubricate as needed Inspect control box, associatedcontrols/accessories, wiring and connections. Controls may include contactors, relays, circuit boards, capacitors, sump heat and other accessories. Alll control box and electrical parts should be checked for wear or damage.

Inspect compressor and associated tubing.

Indoor units

Inspect and clean blower assembly (includes blower housing, blower wheel and motor) On older models, lubricate motor and inspect and replace fan belt if needed Check combustion blower housing for lint and debris and clean as necessary Inspect evaporator coil, drain pan and condensate drain lines. Clean as needed Inspect for gas leaks in gas furnaces Inspect brurner assembly—clean and adjust as needed Inspect ignition system and safety controls—clean and adjust as needed Inspect heat exchanger or heating elements Inspect flue system—check for proper attachment to the furnace, any dislocated sections, and for signs of corrosion. Replace if necessary Inspect control box, associated controls, wiring and connections Clean or replace air filters Inspect conditioned airflow system (ductwork)—check for leaks

While your system is operating

Monitor system starting characteristics and capabilities Leisten for abnormal noise Search for source of unusual odors Monitor air conditioning and heat pump systems for correct refrigerant charge Measure outdoor dry bulb temperature Measure indoor dry and wet bulb temperature Measure high and low side system pressures Monitor gas furnace for correct line and manifold gas pressure—make adjustments as needed Measure temperature rise and adjust airflow as needed Check vent system for proper operation Monitor system for correct line and load volts/amps Monitor system operation per manufacturer's specifications Provide system operation report and recommend repairs or replacement as necessary

Commercial Canopy Extraction Services

Axial fan commercial catering ,Axial Flow Extractor Fans, Centrifugal fan ,Commercial Kitchen,Commercial Extraction Exhaust System Installation, Flakt Woods Aixal fan,Used to extract fan in commercial kitchen,Mixed Flow/Turbo Extractor Fans ,Woods Axcent 3 Mixed Flow Extractor Fans (Turbo),ACK Mixed Flow Extractor Fans (Turbo),Woods Twin Turbo High Pressure Fans (Controller Model),Commercial Canopy Services,Commercial and Industrial ventilation systems,Kitchen Extraction Systems ,Toilet and washroom extraction, Canopy Service and repair ,Contract maintenance,Fans and Filters replacement,Stainless steel bespoke canopies design and installation

Commercial Pipe Purging Services

Commercial Gas Pipework Sizing,Commercial Gas Pipework Strength Testing,Pipework tightness test,Commercial Gas Pipework Tightness Testing,Industrial and Commercial Gas Pipework Purging ,Commercial Gas Pipework, Installation Commissioning Commercial Gas Pipework ,Commercial Gas Pipe Installation De-Commissioning,Gas Leak Trace and Repairs ,Gas Boosters and High Pressure Pipework,Commercial Pipe Tightness testing and purging